Husqvarna LC 151 Operator's Manual page 10

To use the product with the grass
catcher (LC 151, LC 151S)
WARNING:
without a grass catcher installed or without
the rear cover closed. Objects can eject and
cause injury to the operator.
1. Lift the rear cover and remove the mulch plug if it is
installed.
2. Assemble the grass catcher, refer to
the grass catcher (LC 151, LC 151S) on page 8 .
3. Put the grass catcher on the bracket.
4. Release the rear cover and put it on top of the grass
bag frame.
To change the product to mulch mode
(LC 151, LC 151S)
Make sure the engine is off before you change the
product to mulch mode.
1. Lift the rear cover and remove the grass catcher, if it
is installed.
10
Do not operate the product
To assemble
2. Put the mulch plug into the discharge channel.
3. Close the rear cover and make sure that it is tightly
closed against the mulch plug.
Note:
To increase the performance of the mulch
mode, replace the blade with the mulch blade
To replace the blade on page 13
accessory. Refer to
To change the product to side
discharge mode
1. Lift the rear cover and remove the grass bag, if it is
installed.
2. Close the rear cover and make sure that it is tightly
closed against the product.
3. Lift the discharge lock.
1566 - 008 - 24.11.2021