Removing the disc
Note
When you write new data onto the disc, before removing
the disc from the MVC-CD1000, be sure to follow the
procedure below. If you remove the disc or disconnect the
USB cable, without following the procedure, data on the
disc may be broken.
When you open the file in the disc with your application software, quit it before
starting the procedure below.
1
Right-click on th
[Eject] from the drop-down list box.
The "Eject Disc" window appears.
2
Check the appropriate option and click [Finish].
• If you do not execute the finalization, click the upper option on the window.
• If you execute the finalization to view images on a CD-ROM drive, click the
lower option on the window. When you will not add or modify data on the
disc any more, also, check the "Protect disc so it cannot be written to again"
option.
3
Check that the ACCESS lamp is not lit, then open the disc cover
and remove the disc.
12
e DirectCD icon
on the taskbar and select