Gigabyte H610I DDR4 User Manual page 16

Hide thumbs Also See for H610I DDR4:
Table of Contents

Advertisement

Line In/Rear Speaker Out (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green)
The line out jack.
Mic In/Center/Subwoofer Speaker Out (Pink)
The Mic in jack.
Audio Jack Configurations:
Jack
Line In/Rear Speaker Out
Line Out/Front Speaker Out
Mic In/Center/Subwoofer
Speaker Out
Front Panel Line Out/Side
Speaker Out
• You can change the functionality of an audio jack using the audio software.
• To configure 7.1-channel audio, you need to open the audio software and select Device
advanced settings > Playback Device to change the default setting first.
• When removing the cable connected to a back panel connector, first remove the cable from
your device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side
to prevent an electrical short inside the cable connector.
Please visit GIGABYTE's website for details on configuring the audio software.
Headphone/
4-channel
2-channel
a
a
a
- 16 -
5.1-channel
7.1-channel
a
a
a
a
a
a
a

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents