8.6.
Remove the Side unit assy
1. Disconnect the connector (C14).
2. Remove the claws (×2
assy.
3. Remove the screw (×1
4. Remove the Side unit mount metal.
) and remove the Side unit
).
8.7.
Remove the SN-Board
1. Disconnect the flexible cables (SN1, SN2, SN3, SN4,
SN5, SN6, SN7 and SN8) connected to the SN-Board.
2. Disconnect the connector (SN2).
3. Disconnect the flexible cable (SN20).
4. Remove the screws (×9
8.8.
Remove the SS-Board
1. Disconnect the connector (SS11).
2. Disconnect the flexible cable (SS33).
3. Disconnect the flexible cable (SS61).
4. Remove the screws (×4
Board.
22
) and remove the SN-Board.
, ×3
) and remove the SS-