Advertisement
3.1.10 Removing the audio signal 2 board & video board & S video board
(See Fig.9 to 11)
• Prior to performing the following procedure, remove the top
cover, rear panel, Y/C separator board, DSP board and audio
signal 1 board.
(1) Disconnect the harness from the connector
front AV in board (see 2-3.Front panel assembly section/
fig.2).
(2) Disconnect the harness from the connector
audio signal 2 board.
(3) Remove the audio signal 2 board from the connector
and
CN6
on the input base board.
(4) Remove the video board from the connector
input base board.
(5) Remove the S video board from the connector
input base board.
3.1.11 Removing the V compo 1 board
(See Fig.9 to 11)
• Prior to performing the following procedure, remove the top
cover and rear panel.
(1) Remove the V compo 1 board from the connector
the input base board.
1-10 (No.22019)
All manuals and user guides at all-guides.com
Input base board
CN973
on the
CN324
on the
CN15
CN7
on the
CN8
on the
Audio signal 2 board
Connection between the Input base board and each board.
CN15/CN6
CN9
on
CN324
Video board
Fig.9
Audio signal 2 board (CN325/CN321)
CN7
Video board (CN401)
CN8
S video board (CN451)
CN9
V compo 1 board (CN501)
Fig.10
Input base board
CN15
CN6
CN7
Fig.11
FRONT
V compo 1 board
S video board
FRONT
CN8
CN9
Advertisement
