Advertisement
scN(_B)
YOU can easily change the colors inan image when it isshotforboth
stills and movies, allowing you to enjoy producing various effects.
Depending on the shooting conditions,
however, the images may
appear rough, or you may not get the expected color. Before
photographing
important subjects, we recommend taking trial shots
and checking the results. By setting the [Save Original] function
(p. 56) to [On] when shooting stills, you can also record both the
altered image and the original, unaltered image.
Color Accent
Shoot with all colors, with _heexception of the color
specif_d in the LCD monitor, in black and white.
Specify a color in the LCD monitor, and shoot with
another color replacing the one specified. The specified
Color Swap
color can on y be swapped w th one other co or.
_]
epending
on scene
being
shot,
the ISO speed
may
increase,
increasing
the amount
of noise
in the image.
Shooting
with Color Accent
Mode
1
Use the •
or 1_ button
to select
[]
(Color
Accent)
_ SET
button.
• The camera will switch to color input
mode, and the display will alternate
between the original image and the
Color Accent image (using the
previously set color).
/. Aim the camera
so that the color you wish
to retain
appears
at the center
of the LCD monitor
(or
viewfinder)
and press the •
button.
• Only one color can be specified.
• You can use the • or •
button to specify the range of the
colors that are retained.
-5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to retain.
2
o
r.,
53
Advertisement
