Computers - Sony DSC-T10 Handbook
The cyber-shot t10 - for detail like no other - a stylish and super slim digital camera with double 'anti-blur' technology - combining a super steadyshot optical image stabiliser and high sensitivity, as well as 7.2 effective megapixels, zeiss 3x optical
Hide thumbs
Also See for DSC-T10:
- Handbook (119 pages) ,
- Service manual (25 pages) ,
- Instruction manual (32 pages)
Table of Contents
Advertisement
Troubleshooting
The resizing function does not work.
•
You cannot resize movies and Multi Burst images.
You cannot cut a movie.
The movie is not long enough to cut (shorter than about two seconds).
•
Cancel the protection (page 46).
•
Computers
You do not know if the OS of your computer is compatible with the camera.
Check "Recommended computer environment" on page 69 for Windows, and page 84 for
•
Macintosh.
"Memory Stick PRO Duo" is not recognized by a computer with a "Memory
Stick" slot.
Check that the computer and the Memory Stick Reader/Writer support "Memory Stick PRO
•
Duo". Users of computers and Memory Stick Readers/Writers made by manufacturers other
than Sony should contact those manufacturers.
If "Memory Stick PRO Duo" is not supported, connect the camera to the computer (pages 72
•
and 84). The computer recognizes the "Memory Stick PRO Duo".
Nothing appears on the camera screen when a USB connection is made.
The switch on the cable for multi-use terminal is set to "TV". Set to "CAMERA" (page 72).
•
Your computer does not recognize your camera.
Turn on the camera.
•
When the battery level is low, install the charged battery pack, or use the AC Adaptor (not
•
supplied).
Set [USB Connect] to [Mass Storage] in the
•
Use the cable for multi-use terminal (supplied) (page 72).
•
Disconnect the cable for multi-use terminal from both the computer and the camera, and
•
connect it again firmly.
Disconnect all equipment other than the camera, the keyboard and the mouse from the USB
•
connectors of your computer.
Connect the camera directly to your computer without passing through a USB hub or other
•
device (page 72).
The software (supplied) is not installed. Install the software (page 70).
•
Your computer does not properly recognize the device because you connected the camera and
•
your computer with the cable for multi-use terminal before you install the software (supplied).
Delete the erroneously recognized device from your computer, then install the USB driver
(see the next item).
98
(Setup) menu (page 64).
Advertisement
Chapters
Table of Contents
