Table of Contents
Advertisement
Adjusting the height of the upper basket
If washing very large plates (over 27
cm and up to 31 cm in diameter) you
can load them in the lower basket
after moving the upper basket to the
higher position.
To move to the higher position
proceed as follows:
1. Move the front runner stops (A) of
the upper basket outwards and
slide the basket out.
2. Refit the basket in the higher
position and replace
the stops (A) in their original
position.
Attention!
When the top basket is in the
higher position it will only
take plates up to 20 cm in
diameter and you will not be
able to use the raised cup
racks.
After loading your machine always close the door, as an open door
can be a hazard.
A
RC01
21
Hide quick links:
Advertisement
Table of Contents
