Setup 2
2
The default settings are marked with
File Number
Selects the method used to assign file numbers to images.
Series
Reset
USB Connect
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
PictBridge
PTP
Mass Storage
46
For details on the operation
.
Assigns numbers to files in sequence even if the recording
folder or the "Memory Stick Duo" is changed. (When the
replaced "Memory Stick Duo" contains a file with a number
higher than the last assigned number, a number one higher
than the largest number is assigned.)
Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Connects the camera to a PictBridge compliant printer
(page 65).
When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
on the camera are copied to the computer. (Compatible with
Windows XP and Mac OS X.)
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 52).
1
page 39