Summary of Contents for Black Box FT2550A
- Page 1 © Copyright 2000. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...
-
Page 2: Customer Support Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com... - Page 4 PROFESSIONAL LEVEL AND TEMPLATE TOOL Introduction Description The Professional Level and Template Tool is a time- saving device that makes installing “old work” electrical boxes easy and efficient. This tool will help the professional audio and security installer, the telecommunication installer, the professional electrician, and the “do-it-yourselfer”...
- Page 5 PROFESSIONAL LEVEL AND TEMPLATE TOOL Features • Lightweight, durable, and inexpensive. • Solid one-piece injection-molded plastic. • Non-slip extruded rubber on the underside. • Two leveling vials for horizontal and vertical orientations. • Works with all types of 2x2 and 4x4 old work electrical boxes.
- Page 6 PROFESSIONAL LEVEL AND TEMPLATE TOOL Using the Level and Tool 1. Grip the tool by the vertical vial housing on side B. 2. Place the tool on the wall where the electrical box is to be located. 3. Adjust the template until the horizontal vial indicates the template tool is level.
- Page 7 PROFESSIONAL LEVEL AND TEMPLATE TOOL 5. Use an appropriate saw (for example, a drywall saw for drywall) to cut out an opening for the outlet box. (Cut away the corners first, then all other material. Cut along the trace line from step 4.) The tool works with all types of electrical boxes and low-voltage cable plates.
- Page 8 PROFESSIONAL LEVEL AND TEMPLATE TOOL 6. Feed 10" to 15" of wire/cable through the new opening in the wall. 7. Insert the cable through the opening in the back of the electrical box under the clamp shoe. 8. Insert the electrical box/plate into the opening in the wall.