Using The Digital Zoom/Digital Tele-Converter - Canon PowerShot SX100 IS User Manual

Using the Digital Zoom/
Digital Tele-Converter
Shooting Mode
You can combine digital zoom with optical zoom when shooting.
The available shooting characteristics and focal lengths (35mm film
equivalent) are as follows:
Selection Focal Length
Standard 36 – 1440 mm
Off 36 – 360 mm
1.6x 57.6 – 576 mm
2.0x 72 – 720 mm
The digital zoom cannot be used in
(Widescreen) modes.
Shooting with the Digital Zoom
1
Select [Digital Zoom].
1. Press the
2. In the
button to select [Digital Zoom].
See Functions Available in Each Shooting Mode (p. 222).
Enables shooting at zoom factors of up to
40x with digital and optical zoom
combined. The
standard mode.
Enables shooting without digital zoom.
Digital zoom is fixed at the selected zoom
factor, and the focal length shifts to
maximum telephoto. This enables a faster
shutter speed and less chance of camera
shake than a shot taken at the same angle
of view with [Standard] or [Off].
button.
menu, use the
Commonly Used Shooting Functions
* : [Digital Tele-converter] cannot be set.
Shooting Characteristics
can only be set in the
or
or
61
(Postcard), or