Sony SLV-E530UX Operating Instructions Manual page 30

2
Enter your personal code.
PAUSE
1 Press > /. to select a character.
REW PLAY FF
OK
STOP
2 Press / to set the next character.
3
PAUSE Press OK.
A confirmation screen appears.
REW PLAY FF
OK
STOP
4
PAUSE If the displayed personal code is correct, press OK.
If the displayed personal code is wrong, press CLEAR and continue
REW PLAY FF
from step 2.
OK
STOP
CLEAR
To confirm you personal ID
While the VCR is turned off and there is no tape in the VCR, hold down P
PAUSE and ON/STANDBY on the VCR simultaneously for more than three
seconds. The entered personal code appears on the TV screen. Press any
button to enter normal viewing mode.
Note
• Once you enter your personal code, you cannot change it by yourself. If you need to
change the entered personal code, consult your nearest Sony service facility.
Each time you press > , the character
changes as shown below.
A n B n ... n Z n 0 n 1 n ... n 9
n (blank space) n – (hyphen) n A
The next space flashes.
To correct a character, press ? // until the character you want
to correct flashes, then reset it.
You can set up to 11 characters for your personal code.
SECURITY FUNCTION
PERSONAL CODE
[ W B 2 1 5 7 5 – – – – ]
S E L E C T : B b
S E T : V v
C O N F I R M : O K
SECURITY FUNCTION
PERSONAL CODE
[ W B 2 1 5 7 5 – – – – ]
F I N A L C O N F I R M : O K
C A N C E L : C L E A R
Getting Started
29