Audio Settings - Sony BDP-S470 Operating Instructions Manual

BD/DVD-ROM 1080/24p Output
Auto
Off
YCbCr/RGB (HDMI)
Auto
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
RGB
HDMI Deep Colour Output
Auto
12bit
10bit
Off
Pause Mode
Auto
Frame
20
Outputs 1920 × 1080p/
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HDMI OUT jack.
Select this when your TV is
not compatible with 1080/
24p video signals.
Automatically detects the
connected TV type, and
switches to the matching
colour setting.
signals.
signals.
Outputs RGB video signals.
Normally select this.
Outputs 12bit/10bit video
signals when the connected
TV is compatible with Deep
Colour.
Select this when the picture
is unstable or colours appear
unnatural.
Normally select this.
Dynamic moving pictures
appear without blurring.
Displays static pictures at
high resolution.

Audio Settings

Audio (HDMI)
Auto Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
PCM Outputs PCM signals from
the HDMI OUT jack.
DSD Output Mode
On Outputs DSD signals from
the HDMI OUT jack when
playing a Super Audio CD.
When "On" is selected, no
signal is output from other
jacks.
Off Outputs PCM signals from
the HDMI OUT jack when
playing a Super Audio CD.
BD Audio MIX Setting
On
Outputs the audio obtained
by mixing the interactive
and secondary audio to the
primary audio.
Off Outputs the primary audio
only. Select this to output
HD audio signals to an AV
amplifier (receiver).
Dolby Digital (Coaxial / Optical)
Downmix Converts to output Linear
PCM
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
DTS (Coaxial / Optical)
Downmix Converts to output Linear
PCM PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
DTS
Select this when connecting
to an audio device with a
built-in DTS decoder.