Installation - IKEA FINPUTSAD Instruction Manual

ENGLISH
ENGLISH
ENGLISH

INSTALLATION

Installation
ATTENTION: If the appliance must be moved at any time, keep it
ATTENTION: If the appliance must be moved at any time, keep it in
in an upright position; if absolutely necessary, it may be tilted onto
an upright position; if absolutely necessary, it may be tilted onto its
its back.
INSTALLATION
back.
CONNECTING THE WATER SUPPLY
Connecting the water supply
ATTENTION: If the appliance must be moved at any time, keep it
Adaptation of the water supply for installation should only be
Adaptation of the water supply for installation should only be
in an upright position; if absolutely necessary, it may be tilted onto
performed by a qualified technician
performed by a qualified technician.
its back.
The water inlet and outlet hoses may be positioned towards the
The water inlet and outlet hoses may be positioned towards the right
right or the left in order to achieve the best possible installation.
or the left in order to achieve the best possible installation.
Make sure the dishwasher does not bend or squash the hoses. Make sure the dishwasher does not bend or squash the hoses.
CONNECTING THE WATER SUPPLY
Adaptation of the water supply for installation should only be
Connecting the water inlet hose
CONNECTING THE WATER INLET HOSE
performed by a qualified technician
• Run the water until it is perfectly clear.
• Run the water until it is perfectly clear.
The water inlet and outlet hoses may be positioned towards the
• Screw the inlet hose tightly into position and turn on the tap.
• Screw the inlet hose tightly into position and turn on the tap.
• If the inlet hose is not long enough, contact a specialist store or an
right or the left in order to achieve the best possible installation.
If the inlet hose is not long enough, contact a specialist store or
authorised technician.
Make sure the dishwasher does not bend or squash the hoses.
an authorised technician.
The water pressure must be within the values indicated in the
The water pressure must be within the values indicated in the
Technical Data table - otherwise the dishwasher may be function
CONNECTING THE WATER INLET HOSE
Technical Data table - otherwise the dishwasher may be function
properly.
properly.
Make sure the hose is not bent or compressed.
• Run the water until it is perfectly clear.
Make sure the hose is not bent or compressed.
• Screw the inlet hose tightly into position and turn on the tap.
Specifications for the connection of the water
SPECIFICATIONS FOR THE CONNECTION OF THE WATER
If the inlet hose is not long enough, contact a specialist store or
an authorised technician.
Water supply
WATER SUPPLY
The water pressure must be within the values indicated in the
Water intake
Technical Data table - otherwise the dishwasher may be function WATER INTAKE
properly.
POWER OF WATER
Power of water
Make sure the hose is not bent or compressed.
PRESSURE
Pressure
SPECIFICATIONS FOR THE CONNECTION OF THE WATER
Supply hose:
SUPPLY HOSE:
WATER SUPPLY
CONNECTING THE WATER OUTLET HOSE
Connecting the water outlet hose
WATER INTAKE
Connect the outlet hose to a drain duct with a minimum diameter of
Connect the outlet hose to a drain duct with a minimum diameter
POWER OF WATER
2 cm A.
of 2 cm A.
PRESSURE
SUPPLY HOSE:
CONNECTING THE WATER OUTLET HOSE
Connect the outlet hose to a drain duct with a minimum diameter
of 2 cm A.
The outlet hose connection must be at a height ranging from 40 to
The outlet hose connection must be at a height ranging from
80 cm from the floor or surface where the dishwasher rests Before
40 to 80 cm from the floor or surface where the dishwasher rests
connecting the water outlet hose to the sink drain, remove the plastic
Before connecting the water outlet hose to the sink drain, remove
plug B.
the plastic plug B.
Anti-flooding protection
ANTI-FLOODING PROTECTION
Anti-flooding protection. To ensure floods do not occu, the
Anti-flooding protection. To ensure floods do not occu , the dishwasher
dishwasher is provided with a special system which blocks the water
is provided with a special system which blocks the water supply in
supply in the event of anomalies or leaks from inside the appliance.
the event of anomalies or leaks from inside the appliance.
Some models are also equipped with the supplementary safety
The outlet hose connection must be at a height ranging from
device New Aqua Stop, which guarantees anti-flooding protectio
40 to 80 cm from the floor or surface where the dishwasher rests
Manufacturer:
even in the event of a supply hose rupture.
Before connecting the water outlet hose to the sink drain, remove
Under no circumstances should the water inlet hose be cut as it
IKEA of Sweden AB
the plastic plug B.
contains live electrical parts.
Box 702, 343 81 Älmhult, Sweden
Factory
ANTI-FLOODING PROTECTION
Whirlpool Company Polska Sp z o.o.
Anti-flooding protection. To ensure floods do not occu , the dishwasher
Address: Ul. A. Merloniego 4 97-500 Radomsko – Poland
is provided with a special system which blocks the water supply in
The importer and the entity authorized by the manufacturer:
the event of anomalies or leaks from inside the appliance. Importer: LLC "IKEA TORG", bld. 1, microraion IKEA, Khimki,
Moscow region, 141400 Russia,
Some models are also equipped with the supplementary safety
tel.: +7(495) 737-5301, fax: +7(495) 737-5324
device New Aqua Stop, which guarantees anti-flooding protectio
This device was designed, manufactured, and sold in
even in the event of a supply hose rupture.
accordance with the standards of the Customs Union
Under no circumstances should the water inlet hose be cut as it
technical regulations, and with local normative legal
contains live electrical parts.
documents.
cold or hot (max. 60°C)
cold or hot (max. 60°C)
3/4"
3/4"
0.05 ÷ 1 MPa (0.5 ÷ 10 bar)
0.05 ÷ 1 MPa (0.5 ÷ 10 bar)
7.25 – 145 psi
7.25 – 145 psi
cold or hot (max. 60°C)
3/4"
0.05 ÷ 1 MPa (0.5 ÷ 10 bar)
7.25 – 145 psi
MAX 80 cm
MIN 40 cm
MAX 80 cm
MIN 40 cm
ELECTRICAL CONNECTION
Some models are also equipped with the supplementary safety
WARNING: Under no circumstances should the water inlet
device New Aqua Stop, which guarantees anti-flooding protectio
even in the event of a supply hose rupture. hose be cut as it contains live electrical parts.
Under no circumstances should the water inlet hose be cut as it
Before inserting the plug into the electrical socket, make sure that:
contains live electrical parts.
• The socket is earth and complies with current regulations;
ELECTRICAL CONNECTION
• The socket can withstand the maximum load of the applian-
Electrical connection
WARNING: Under no circumstances should the water inlet
ce as shown on the data plate located on the inside of the door
WARNING: Under no circumstances should the water inlet
hose be cut as it contains live electrical parts.
(see PRODUCT DESCRIPTION).
hose be cut as it contains live electrical parts.
Before inserting the plug into the electrical socket, make sure that:
• The power supply voltage falls within the values indicated on
Before inserting the plug into the electrical socket, make sure that:
the data plate on the inside of the door.
• The socket is earth and complies with current regulations;
• The socket is earth and complies with current regulations;
• The socket is compatible with the plug of the appliance.
• The socket can withstand the maximum load of the appliance
• The socket can withstand the maximum load of the applian-
If this is not the case, ask an authorised technician to replace the
as shown on the data plate located on the inside of the door (see
ce as shown on the data plate located on the inside of the door
plug (see AFTER-SALES SERVICE). Do not use extension ca-
PRODUCT DESCRIPTION).
(see PRODUCT DESCRIPTION).
bles or multiple sockets. Once the appliance has been installed,
• The power supply voltage falls within the values indicated on the
• The power supply voltage falls within the values indicated on
the power supply cable and the electrical socket should be easily
data plate on the inside of the door.
the data plate on the inside of the door.
accessible.
• The socket is compatible with the plug of the appliance.
The cable should not be bent or compressed. • The socket is compatible with the plug of the appliance.
If this is not the case, ask an authorised technician to replace the plug
If the power supply cable is damaged, have it replaced by the
(see AFTER-SALES SERVICE). Do not use extension cables or multiple
If this is not the case, ask an authorised technician to replace the
manufacturer or its authorised Technical Assistance Service in
sockets. Once the appliance has been installed, the power supply
plug (see AFTER-SALES SERVICE). Do not use extension ca-
order to prevent all potential hazards.
cable and the electrical socket should be easily accessible.
bles or multiple sockets. Once the appliance has been installed,
The Company shall not be held responsible for any incidents, if
The cable should not be bent or compressed.
the power supply cable and the electrical socket should be easily
these regulations are not observed.
If the power supply cable is damaged, have it replaced by the
accessible.
manufacturer or its authorised Technical Assistance Service in order
The cable should not be bent or compressed.
POSITIONING AND LEVELLING to prevent all potential hazards.
If the power supply cable is damaged, have it replaced by the
The Company shall not be held responsible for any incidents, if these
1. Position the dishwasher on a level sturdy floo . If the floor i
regulations are not observed.
manufacturer or its authorised Technical Assistance Service in
uneven, the front feet of the appliance may be adjusted until
order to prevent all potential hazards.
it reaches a horizontal position. If the appliance is levelled
Positioning and levelling
The Company shall not be held responsible for any incidents, if
correctly, it will be more stable and much less likely to move or
1. Position the dishwasher on a level sturdy floo . If the floor i
these regulations are not observed.
cause vibrations and noise while it is operating.
uneven, the front feet of the appliance may be adjusted until it
2. Before recessing the dishwasher, stick the adhesive transparent
reaches a horizontal position. If the appliance is levelled correctly,
POSITIONING AND LEVELLING
strip under the wooden shelf in order to protect it from any con-
it will be more stable and much less likely to move or cause
densation which may form.
vibrations and noise while it is operating.
1. Position the dishwasher on a level sturdy floo . If the floor i
2. Before recessing the dishwasher, stick the adhesive transparent
3. Place the dishwasher so that its sides or back panel are in
uneven, the front feet of the appliance may be adjusted until
strip under the wooden shelf in order to protect it from any
contact with the adjacent cabinets or the wall. This appliance
it reaches a horizontal position. If the appliance is levelled
condensation which may form.
can also be recessed under a single worktop.
correctly, it will be more stable and much less likely to move or
3. Place the dishwasher so that its sides or back panel are in contact
4. To adjust the height of the rear foot, turn the red hexagonal
cause vibrations and noise while it is operating.
with the adjacent cabinets or the wall. This appliance can also be
bushing on the lower central part at the front of the dishwasher
recessed under a single worktop.
2. Before recessing the dishwasher, stick the adhesive transparent
using a hexagonal spanner with an opening of 8 mm. Turn the
4. To adjust the height of the rear foot, turn the red hexagonal
strip under the wooden shelf in order to protect it from any con-
spanner in a clockwise direction to increase the height and in
bushing on the lower central part at the front of the dishwasher
densation which may form.
an anticlockwise direction to decrease it.
using a hexagonal spanner with an opening of 8 mm. Turn the
3. Place the dishwasher so that its sides or back panel are in spanner in a clockwise direction to increase the height and in an
DIMENSIONS AND CAPACITY:
anticlockwise direction to decrease it.
contact with the adjacent cabinets or the wall. This appliance
can also be recessed under a single worktop.
WIDTH
Dimensions and capacity:
4. To adjust the height of the rear foot, turn the red hexagonal
HEIGHT
Width
bushing on the lower central part at the front of the dishwasher
DEPTH
using a hexagonal spanner with an opening of 8 mm. Turn the
Height
CAPACITY
spanner in a clockwise direction to increase the height and in
an anticlockwise direction to decrease it. Depth
Capacity
DIMENSIONS AND CAPACITY:
WIDTH
HEIGHT The entity authorized by the manufacturer to take actions
in Russian Federation for assessment of the conformity of
DEPTH
products: LLC "Whirlpool RUS", Russian Federation, 127018,
Moscow, Dvintsev street 12, building 1 letter V, floor 5;
CAPACITY
tel.: +7 (495) 961-29-00
Made in Poland
For IKEA product quality issues, contact the seller: LLC
IKEA DOM, bld. 1, microraion IKEA, Khimki, Moscow region,
141400 Russia; tel.: +7 (495) 666-2929, www.ikea.ru
Life cycle: 10 years
After life cycle is finished, your product can become
dangerous. So, after life cycle has been finished, or in case
you decided to stop using product earlier, please address to
appropriate officials to legally destroy the appliance"
598 mm
820 mm
448 mm
555 mm
820 mm
13 standard place-settings
555 mm
10 standard place-settings
598 mm
820 mm
555 mm
13 standard place-settings
31