Clean And Grease Breaker - ABB Emax 2 Installation And Maintenance Manual

Clean and Grease Breaker


Before installing or operating a breaker, refer to the Emax 2 Breaker installation manual
1SDH001330R0002 for pre-operation inspecting and testing.

Check thoroughly for any damaged or loose parts and for any dirt or foreign matter
which may be on the breaker.

Clean those areas if necessary with a clean, lint-free rag and isopropyl alcohol or acetone.

Be sure to apply a thin film of Mobilgrease #28 to the primary disconnect fingers for
better electrical connections on the breaker, and lower racking force.
2TSA451011P0000 Rev-B
© 2020 Emax 2 Retrofill Circuit Breakers 600A-4000A | 25