Advertisement
Quick Links
Product Warnings
Safety Guidelines
Kit Contents
Required Tools
Preparation Tips
Installation Procedure
Cleaning & Maintenance
Surface Repair
Warranty Information
Register your warranty at www.swanstone.com.
Cabinet Mount Vanity Tops & Bowls
Models:
Chesapeake Vanity (Single Bowl)
Chesapeake Vanity (Double Bowl)
Contour Vanity (Single Bowl)
Ellipse Vanity (Single Bowl)
Ellipse Vanity (Double Bowl)
Europa Vanity (Single Bowl)
Hilo Vanity Bowl
Islandia Vanity Bowl
Palladio Above-Counter Washbasin
Form #255-1
Advertisement
Related Manuals for Swann Chesapeake Vanity
Summary of Contents for Swann Chesapeake Vanity
- Page 1 Cabinet Mount Vanity Tops & Bowls Models: Chesapeake Vanity (Single Bowl) Chesapeake Vanity (Double Bowl) Contour Vanity (Single Bowl) Ellipse Vanity (Single Bowl) Product Warnings Ellipse Vanity (Double Bowl) Safety Guidelines Europa Vanity (Single Bowl) Kit Contents Hilo Vanity Bowl...
- Page 2 Safety Guidelines IMPORTANT NOTICE The Swan Assurance — if our product is IMPORTANT NOTICE: Indicates that equipment or property properly installed and maintained, as stated in damage can result if instructions are not followed. these instructions, it will not leak. –...
- Page 3 Safety Guidelines Personal Protection Dust Hazard Be sure to use all personal protective When cutting or drilling the Swanstone product, equipment, such as sturdy work boots, use a dust collection method which prevents preferably with steel toes, gloves, and hard hat, if necessary, dust particles from going into the air.
- Page 4 General Information Sink Contents Contour Vanity (Single Bowl) Confirm that all parts for the vanity top or bowl have been included before beginning installation. Chesapeake Vanity (Single Bowl) CTVSB-01 CV-2225 (22"D x 25"W) CV-2231 (22"D x 31"W) CV-2237 (22"D x 37"W) CV-2243 (22"D x 43"W)
- Page 5 General Information Europa Vanity (Single Bowl) Palladio Above-Counter Washbasin EUVSB-01 PACW-01 EV-2225 (22-1/2"D x 25"W) WB-2218 (18"D x 22"W) EV-2231 (22-1/2"D x 31"W) EV-2237 (22-1/2"D x 37"W) EV-2243 (22-1/2"D x 43"W) Vanity Top Accessories EV-2249 (22-1/2"D x 49"W) EV-2255 (22-1/2"D x 55"W) Side Splash and Front Apron Panels EV-2261 (22-1/2"D x 61"W) Hilo Vanity Bowl...
- Page 6 Installation Procedure Installation Procedure Unpack Carton Use care when opening the box not to damage the sink. Disclaimer This product is shipped to you or your retail center after The information contained in this Installation Manual is careful inspection. After purchasing the sink, carefully given free of charge.
- Page 7 Installation Procedure If necessary, identify the location of additional holes for the Drill fixture hole(s), using the 1/4” pilot hole for a guide, faucet or other accessories and drill a 1/4” pilot hole from with a 1-3/8” hole saw. the back side of the sink. VI-008 VI-002 Faucet may be installed at this time per manufacturer’s...
- Page 8 Installation Procedure Clean underside of vanity sink with denatured alcohol. Place Swanstone vanity top onto the cabinet, making sure Remove all dust and allow the surface dry completely. vanity is seated properly. VI-006 D e n a t u r e d A lc o h VI-007 WARNING...
- Page 9 Installation Procedure 10. Connect the faucet supply lines per the manufacturer’s instructions. IMPORTANT NOTICE To prevent breakage or distortion of the overflow assembly, do not use oil-based caulking or plumber’s putty near the overflow assembly. Oil-based plumber’s putty will have a harmful effect on the plastic overflow assembly, resulting in a leak.
- Page 10 Installation Procedure Caulk all seams between wall and side/back splash to WARNING create a moisture barrier. If desired, use a proper color- matched silicone sealant (not included). D D u u s s t t H H a a z z a a r r d d When sanding Swanstone product, use a dust collection method which prevents dust particles from going into the air.
- Page 11 Installation Procedure Drill starter hole inside of cutout line. If installing for raised mount, apply adhesive around base flange and set bowl in place. VI-030 VI-033 Apply Silicone Here Use a saber saw to cut inside of cutout line. 10. If installing for drop-in mount, apply adhesive on the underside of bowl flange and set bowl into opening.
- Page 12 Installation Procedure Cut opening and finish the edge of the hole. IMPORTANT NOTICE WARNING To prevent breakage or distortion, do not use oil-based caulking or putty to connect the overflow assembly. Oil-based D D u u s s t t H H a a z z a a r r d d plumber’s putty will have a harmful effect on the overflow When sanding Swanstone product, assembly, resulting in a leak.
- Page 13 Installation Procedure If mounting the bowl with an undermount overlap, bowl WARNING should be positioned, as shown. S S o o l l v v e e n n t t s s H H a a z z a a r r d d Follow manufacturers’...
- Page 14 Installation Procedure 15. Connect the drain lines and p-trap per the manufacturer’s 17. Install tail pipe onto the sink ring. instructions. No Plumber’s Putty in this location VI-010 VI-051 18. Tighten the tail pipe assembly onto the sink Note: Swanstone recommends using a licensed plumber for the installation of all necessary plumbing.
- Page 15 Installation Procedure Attach template to counter with masking tape and trace Install faucet per the manufacturer’s instructions. inside template with a pencil. Clean bowl flange and countertop with denatured alcohol. Remove all dust. Let the surfaces dry completely. VI-040 Apply a bead of silicone around the underside of sink flange and position it over the countertop opening.
- Page 16 Installation Procedure 12. Apply sealant to the bottom side of the sink ring IMPORTANT NOTICE Apply Plumber’s Do not overtighten the nut when installing the tail pipe. Hand- Putty tighten the nut and then tighten NO MORE than one-half turn. Here Overtightening will break the overflow assembly and void the warranty.
- Page 17 Installation Procedure ADA Installation Recommendations Accessibility Requirements In order to comply with ADA requirements, the lavatory must Note: Only lavatory installations in a public space must comply have adequate floor clearances in front of the sink. It must with the knee and toe clearance dimensions, however we also be installed at the proper height with the specified leg and recommend these standards be used for both private and wheel chair clearance under the sink.
- Page 18 Maintenance and Cleaning Warranty Care and Cleaning Warranty The Swanstone products are stain and abrasion resistant; If a Swan product covered by this warranty is found to be however, the finish requires reasonable care. defective in materials or workmanship, after inspection by an authorized Swan Corporation representative, we will repair, or at our option, exchange the product for a similar model.
- Page 20 Save these Installation Instructions for future reference. They provide important information on cleaning, maintenance, and surface repair of the Swanstone Products. www.swanstone.com Form #255-1...