Screen; Indicator - Panasonic FZ-N1 Series Operating Instructions Manual

Troubleshooting

Screen

The screen is too dark.
•
The [Adaptive brightness] setting reduced the brightness according to the ambient brightness.
Manually adjust the screen brightness.
Swipe up the home screen, and then in the app list, tap [Settings] ® [Display] (® [Adaptive
1.
brightness])
*1
Android 9 only
2.
Tap the [Adaptive brightness] switch to turn it off.
3.
Android 8.1
Tap [Brightness level] and then adjust the slider.
Android 9
Tap
•
The [Minimum limit brightness] setting of customized silent mode was turned on. Turn the setting
off.
Swipe up the home screen, and then in the app list, tap [Settings] ® [Sound] (®
1.
[Advanced])
*1
Android 9 only
2.
Tap the [Customized silent mode] switch to turn it off, then tap the [Minimum limit
brightness] switch to turn it off.
3.
Tap the [Customized silent mode] switch to turn it on.
There are red, green, or blue dots on the screen, or there is unevenness in screen colors or
brightness.
•
The following are not malfunctions.
–
Although advanced high-precision technologies are used in the production of color LCD screens,
a very small number of the screen pixels may be dark or remain constantly lit.
–
Due to the natural characteristics of LCD screens, you may notice unevenness in colors and
brightness depending on your angle of view. Hues may also vary by product.
Residual images are displayed.
•
Residual images may be displayed if the same screen is displayed for a long time. Display a different
screen.
I cannot operate the touchscreen.
The touchscreen operates involuntarily.
•
Temporarily put the unit into sleep mode and then wake it up again.

Indicator

The indicator flashes in orange.
•
The battery cannot be charged temporarily because the ambient temperature is too low or too high.
Leave the unit in an environment of 10 °C to 35 °C (50 °F to 95 °F) for about an hour.
The indicator lights in red.
•
The remaining battery level is approximately less than 15 % of a full charge. Charge the battery.
The indicator flashes in red.
•
Battery authentication failed. Use only a specified battery.
•
There may be debris lodged in the battery charge terminals. Remove the battery and remove any
debris found.
•
Charging may have stopped automatically. Disconnect the AC adaptor and then reconnect it.
The indicator does not light during charging.
Battery charging ends quickly, or the battery cannot be charged at all.
•
The AC adaptor or USB connection cable is not connected properly. Confirm all connections.
60 Operating Instructions - Reference Manual
.
*1
, and then tap [Brightness level] and adjust the slider.
® [Customized silent mode].
*1