Dishwashers That Can Be Integrated; Built-In Dishwasher; Free-Standing Appliances - AEG KO_FAVORIT 4270 I User Instructions

Installation and Connection Instructions
• Depending on type, the dishwasher is to be installed as follows:

Dishwashers That Can Be Integrated

(see installation template supplied)
The door of the appliance can be fitted with a wooden furniture door
3
with the following dimensions:
Width 587mm 591 – 594 mm
Thickness:
Height:
(variable)
Weight:
If the furniture door is longer than 600 mm, the door of the appliance
1
cannot be opened completely (the facing panel bumps against the
plinth).
If this is the case, the plinth must be cut out (see installation template)
or the brace adapter for the extra long door BLT 60 must be used.
You can obtain this with the E No. 911 239 008.

Built-In Dishwasher

(see enclosed installation instructions)

Free-Standing Appliances

can be set up as stand-alone without additional installation.
If the dishwasher is set up next to a gas or coal cooker, a heat-
1
insulating, non-flammable plate must be mounted between the
dishwasher and the cooker, flush to the top edge of the work surface
(depth 57.5 cm). The plate should have aluminium foil on the side fac-
ing the cooker.
32
16 – 24 mm
– Recess height
dependent on
– Plinth height
– The adjustment so that the unit matches the height of
the adjoining units
The exact height of the adjoining units must be meas-
ured at the place of installation.
max. 8 kg