Specifications - Sony STR-DG520 Operating Instructions Manual

If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver's memory may remedy
the problem (page 25). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
Reference sections for clearing
the receiver's memory
To clear
All memorized settings
Customized sound fields

Specifications

Amplifier section
Models of area code CEL, CEK, ECE, AU
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
Surround Mode Output Power
THD 10%)
Models of area code TW
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
See
page 25
Stereo Mode Output Power (8 ohms, 1 kHz,
page 49
THD 1%)
Surround Mode Output Power
THD 10%)
1)
Measured under the following conditions:
Area code
CEL, CEK, ECE
AU
TW
2)
Reference power output for front, center and
surround speakers. Depending on the sound field
settings and the source, there may be no sound
output.
Frequency response
Analog
1)
85 W + 85 W
100 W + 100 W
2)
(8 ohms, 1 kHz,
130 W/ch
1)
70 W + 70 W
100 W + 100 W
2)
(8 ohms, 1 kHz,
130 W/ch
Power requirements
230 V AC, 50 Hz
240 V AC, 50 Hz
110 V AC, 60 Hz
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
continued
67 GB