Sony STR-DE705 Operating Instructions Manual page 17

Adjusting surround sound parameters
Change the surround parameters to fit your listening
situation. Refer to the chart on the previous page for
parameters you can adjust in each sound field.
To adjust the parameters of the DOLBY SUR sound
field, see "Getting the Most Out of Dolby Pro Logic
Surround Sound" on page 18.
1
Press DPC MODE repeatedly until the SUR
indicator lights up.
2
Use the digital processing control buttons (
) to select the parameter you want.
3
Use the digital processing control buttons ( / )
to adjust the level of the parameter.
The adjusted parameters are stored automatically.
Note
If you make new adjustments to a sound field, the previous
settings are replaced by the new ones.
Resetting customized sound fields to the
factory settings
1
If the power is on, press POWER to turn off the
power.
2
Hold down SOUND FIELD ON/OFF and press
POWER.
"SURR CLEAR!" appears in the display and all
the sound fields are reset at once.
/
Using Surround Sound
17 EN