Canon PowerShot S400 Digital Elph User Manual page 125

Connect the supplied USB interface cable to the computer's
USB port and the camera's DIGITAL terminal.
USB Port
USB Cable
• You do not need to turn off the computer or camera when
making a USB connection.
• Please refer to your computer's manual for information
regarding the location of the USB port.
Set the camera's mode swith to the
camera's power on.
The LCD monitor will turn on in replay mode and then blank out
when the connection to the computer is complete.
Please refer to the Software Starter Guide for the subsequent
procedures.
Downloading Images to a Computer
DIGITAL OUT
Terminal
USB Cable
1
Slip a fingernail under the upper edge of
the terminal cover to open it.
2
Insert the connector until it clicks.
position and turn the
123