Shooting With Fe Lock - Canon PowerShot S3 IS Advanced User's Manual

Shooting with FE Lock

You can obtain the correct exposure regardless of the location of your
subject in the composition.
1
Raise the flash.
2
Press the
3
Focus on the part of the subject on which you wish to
lock the flash exposure setting.
4
Press the shutter button halfway and press the ISO
button.
The flash will pre-fire and
5
Re-aim the camera to compose the shot as desired
and press the shutter button fully.
To Release the FE Lock: Press anything except the
button.
72
button and set it to
Shooting Mode
(flash on).
will display.
, , or