Universal Serial Bus (Usb); Bios Utility; Boot Sequence; Enable Disk-To-Disk Recovery - Acer BRCM1050 Generic User Manual

33

Universal Serial Bus (USB)

The USB 2.0 port is a high-speed serial bus which allows you to connect USB
peripherals without taking up precious system resources.

BIOS utility

The BIOS utility is a hardware configuration program built into your computer's
BIOS.
Your computer is already properly configured and optimized, and you do not need
to run this utility. However, if you encounter configuration problems, you may need
to run it.
To activate the BIOS utility, press <F2> during the POST while the notebook PC
logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select
Boot from the categories listed at the top of the screen.

Enable disk-to-disk recovery

To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility, then
select Main from the categories listed at the top of the screen. Find D2D Recovery
at the bottom of the screen and use the <F5> and <F6> keys to set this value to
Enabled.