Turn the camera's mode dial to the
The LCD monitor will turn on in replay mode and then blank out
when the connection to the computer is complete.
• Ensure that you grip the
sides of the connector to
remove the cable from the
camera's DIGITAL terminal.
• It is recommended to power the camera from a household
power outlet with the optional AC Adapter Kit ACK500
when connected to a computer.
• If the USB cable is detached while the camera power is on,
the camera will power down.
• If no controls have been accessed for approximately 5
minutes, a warning message displays on the computer
screen. The camera powers down approximately 1 minute
later if no control is accessed.
Please refer to the Software Starter Guide for the subsequent
procedures.
Downloading Images to a Computer
position.
121