Quick Start For Single Receiver - Shure GLXD4RA User Manual

7.6 m (25 ft.) Reverse SMA Cable
15.2 m (50 ft.) Reverse SMA Cable
30.4 m (100 ft.) Reverse SMA Cable
Reverse SMA Bulkhead Adapters

Quick Start for Single Receiver

To reduce set-up time, the transmitter and receiver automatically link to form an audio channel the first time they are powered
on and never have to be linked again.
Step ①
Step ②
Step ③
Connect power supply to the receiver and plug cord into an AC power source. Connect the
audio output to an amplifier or mixer.
Install charged transmitter batteries.
Turn on the transmitter and receiver. The blue rf LED will flash while the transmitter and re­
ceiver form a link. The rf LED turns solid blue when the link has successfully formed.
Note: The transmitter and receiver will remain linked for future usage. At power-up, the blue rf LED and transmitter
LED will illuminate, skipping the linking step.
Shure Incorporated
UA825-RSMA
UA850-RSMA
UA8100-RSMA
95A32436
7/33