Canon PowerShot S110 Digital ELPH User Manual page 96

94 Appendices
Subject is too bright
Subject is too close
and the illumination
from the flash is too
bright.
Subject is much
brighter than its
surroundings
Light is shining directly
on subject or reflected
off subject onto camera
Flash is set to On
Flash will not fire
Flash is set to Off
Zoom does not work
Zoom lever pressed
during movie
recording
Cause
• When using the flash, ensure that
• Adjust the exposure compensation
• Change the shooting angle.
• Set the flash to any setting other
Cause
• Set the flash to any setting other
Cause
• Adjust the zoom before shooting a
Solution
the camera is no closer to the
subject than 27 cm (10.6 in.).
to a negative (-) setting.
than On.
Solution
than Off.
Solution
movie.