Table of Contents
Advertisement
PRODUCT FEATURES
•
The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of horizontal and vertical screen
size and position, geometry, and screen color.
•
The monitor supports a safe working environment in strict
compliance with the MPR II standard for low emissions.
•
The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
•
The monitor features Advanced Color Controls for fine-tuning
to meet your own personal tastes or application requirements.
Use the on-screen controls to adjust the color temperature,
RGB gain value for the best possible screen color and intensity.
•
Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of scanning
range.
•
Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
•
The "borderless" full-screen display capability works under all
graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace.
•
The monitor which has applied the Flat CDT offers creating
sharper and cleaner images even at the outer most edges of the
screen.
•
With the POWER LIGHT function added,you can enjoy the
bright screen for movie or any other multimedia utilization.
English - 2
SETUP
INSTALLING THE TILT/SWIVEL STAND
1. Ensure that the power is off to the monitor.
2. Set the monitor face down with the underside facing you.
Please be careful not to scratch the monitor screen.
3. Align the hooks on the stand with the guide holes on the
bottom chassis of the monitor.
4. Insert the hooks into the guide holes.
5. Slide the tilt/swivel stand toward the front of the monitor until
the latch locks in position.
6. Turn the monitor and the stand upright.
If you want to remove the tilt/swivel stand on the monitor, press
the latch and pull the tilt/swivel stand toward the back of the
monitor. Lift the stand to separate.
English - 3
Latch
Advertisement
Table of Contents
