Step-by-step installation guide
A. OUTSIDE TOP EXHAUST (VERTICAL DUCT)
A1. INSTALLATION PROCEDURE
FOR EXHAUST ADAPTOR AND
PROPER DAMPER OPERATION
CHECK
Exhaust Adaptor and Damper is
shipped assembled to the filler-upper.
1. Slide exhaust adaptor following the instructions
show in diagram.
2. Make sure tape securing damper is removed
and damper pivots easoly before mounting
microwave.
• You will need to make adjustments to assure
proper alignment with your house exhaust duct
after the microwave is installed.
A2. ADJUST THE EXHAUST ADAPTOR
Open the top cabinet and adjust the exhaust
adaptor to connect to the house duct.
Blower-Plate
Damper
SMH8165_XAA DE68-03587A-07-EN.indd 12
Back of
Microwave
For Front-to-Back
Adjustment, Slide the
Exhaust Adaptor as
Needed
NOTE: The house duct is needed to connect to the
exhaust adaptor after installation completion.
12
House Duct
13/01/2015 17:40:31