Sony DAV-X10 Operating Instructions Manual page 23

Note
• The video signal is output from the HDMI OUT jack, only when the function is set to "DVD."
• Insert the HDMI cable in the jack oriented correctly as the HDMI cable connector is polar.
To connect to a TV with DVI (digital visual interface) input
Use an HDMI (high-definition multimedia interface)-DVI (digital visual interface) converter cord (not
supplied) with an HDMI (high-definition multimedia interface)-DVI (digital visual interface) adaptor
(not supplied). The DVI (digital visual interface) jack will not accept any audio signals. Furthermore,
you cannot connect the HDMI OUT (high-definition multimedia interface out) jack to DVI (digital
visual interface) jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g.,
DVI (digital visual interface) jacks on the computer displays).
Connecting the TV with the digital optical cord (not supplied)
A TV with a digital optical out jack (TV with built-in digital satellite receiver, etc.) can be connected
to the TV (DIGITAL IN OPTICAL) jack instead of the SAT/CABLE IN (AUDIO) jacks.
The system can accept both the digital and analog signals. Digital signals have priority over analog
signals. If the digital signal ceases, the analog signal will be processed after a few seconds.
: Signal flow
Tip
• When connecting the digital optical cord, insert the connector until it clicks.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
To change the aspect ratio, see page 84.
DIGITAL IN
OPTICAL OPTICAL COAXIAL
COMPONENT VIDEO OUT
SAT/
TV
CABLE
Y
IMPEDANCE USE 4
R
SPEAKER
To TV (DIGITAL IN OPTICAL)
TV with the digital optical jack
DMPORT (DVD ONLY)
1 2
(DVD
P / P / ONLY)
B R
EURO AV OUTPUT(TO TV)
C C
B R
AUDIO VIDEO
L
SAT/CABLE IN
OPTICAL
DIGITAL
OUT
OUT
ANTENNA
A.CAL
AM
MIC
ECM-AC2
FM
75 COAXIAL
continued
23
GB