Using The Theatre Sync Function - Sony DAV-X1 Operating Instructions Manual

Satellite Tuner
Manufacturer
SONY
AMSTRAD
BSKYB
GRUNDING
HUMAX
NOKIA
PACE
PANASONIC
PHILIPS
THOMSON
To control the TV
You can control the TV by using following
buttons.
By pressing
TV [/1
TV/VIDEO*
TV VOL +/–*
TV CH +/–*
Number buttons* Select the TV channel.
* To use these number buttons, set the remote to the
TV mode by pressing the TV button. To cancel the
TV mode, press the TV button again.
You can select the TV channels by using the
number buttons.
To select the TV channels, press the number
buttons, then ENTER.
Note
• Depending on the TV, CATV, or satellite tuner, you
may not be able to use the remote control or some of
the above buttons.
• The TV mode turns off when you do not operate the
remote for 10 seconds.
70
GB
Code number
201, 202, 203
204, 205
221
218, 219
205, 206
210, 212, 213, 223
207, 208, 209, 211, 221, 222,
223
214
215, 216, 217, 218, 219, 223
216, 220, 223
You can
Turn the TV on or off.
Switch the TV's input source
between the TV and other input
sources.
Adjust the TV volume.
Select the TV channel.
Using the THEATRE SYNC
Function
THEATRE SYNC allows you to turn on your
SONY TV and this system, changes the system
mode to "DVD," and then switches the TV's
input source you set with one button push.
TV
TV CH +
ALBUM –/+
Number
buttons
CLEAR
With cover opened.
Preparing for the THEATRE
SYNC function
Register the TV's input source connected to this
system.
Press and hold TV/VIDEO while entering
the code for the TV's input source
connected to this system (see the table)
using the number buttons.
The TV's input source is selected.
If you successfully set the TV's input source
code, the TV button flashes twice slowly. If the
setting is unsuccessful, the TV button flashes 5
times quickly.
Set your TV's input to the input you used to
connect the system. For details, see the
instructions of your TV.
THEATRE
SYNC
TV/VIDEO