Viewing Images On A Tv Set - Canon PowerShot G6 User Manual

Viewing Images on a TV Set

A video-compatible television connected via the supplied AV Cable
AVC-DC300 can be used to view images as you shoot or replay them.
1
Turn off the camera and the TV (p. 31).
2
3
Yellow To the Video
Plug In Jack
Black To the Audio
Plug In Jack
4
Turn on the TV and switch it to Video mode.
5
Turn the mode lever to
The image will appear on the TV. Shoot or play back images as
usual.
No image will appear on the LCD monitor when the camera is
connected to a TV monitor.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 52). The default
setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will not
display properly.
If the TV is a stereo model, you can plug the audio plug into
either the left or right Audio In jack. Please refer to the TV's
manual for details.
A TV set cannot be used in
160
Attach AV Cable AVC-DC300 to
the A/V OUT terminal on the
camera.
Plug the other ends of the AV
cable to the video in and audio in
jacks on the TV.
or
mode.
(p. 30).