Table of Contents
Advertisement
HARDWARE INSTALLATION
Inserting the CardBus Dual-Speed PC
Card
1. Hold the CardBus PC Card with wide
connector toward the slot and the brand
label facing upward.
2. Insert the CardBus PC Card and push it
firmly into the
bottom. (Please see the
figure on the next page for reference)
Removing the CardBus Dual-Speed
PC Card
It's quite different for various computer
mechanical designs. Please refer to the PC
Card removal instruction in the document for
your notebook computer.
Connecting to the Network
Connect RJ-45 port of the CardBus 10/100
Ethernet PC Card Adapter to the Category 5
Network cable before loading any network
driver.
For
operation
(100Base-TX)
Ethernet
Category 5 unshielded twisted pair (UTP)
cable should be used to connect between
- 4 -
in
the
100Mbps
network,
a
Advertisement
Table of Contents
