Step 5: Mains Hookup And Turn On The Power - Sony DAV-DS1000 Operating Instructions Manual

Step 5: Mains Hookup and Turn on the Power

After all connections are complete, connect the mains leads of the subwoofer and rear speakers
to the mains, then connect the mains leads of your TV/Video components.
Before connecting the mains leads
Bundle the connected cords of the subwoofer and secure them with the bands, and then attach
the rear cover of the subwoofer.
Pull the band with pulling the knob to the front, to unfasten the band.
Band
Note
Do not tie the cords too tightly.
Turning on the power
After connecting the mains lead to the mains, turn on the power of the subwoofer and the rear
speakers (when using the rear speakers wirelessly).
The ! (power) button is located on top of the subwoofer (page 13). When you press ! on the
subwoofer, the system goes to standby mode. Then, press 1 on the remote to turn the system
on.
The power switch of each rear speaker is located on their lower side panels (page 22).
GB
28
T O R
E C
N N
C O
T E M
S Y S
Subwoofer
Unfastening the band
Rear cover
Switch