Jump Starting - Whistler MAXX User Manual

WARNING
Explosion Hazard - USE ONLY IN WELL VENTILATED
AREAS. The jump start cable clamps MUST be connected
in correct polarity ~ RED clamp to the battery Positive (+)
and BLACK clamp to the battery Negative (-) terminals,
making sure they have a good connection. A reverse
polarity connection (positive to negative) can cause
damage to this jump starter and/or create a sparking/
explosion hazard.
USE ONLY THE WHISTLER PREMIUM PROTECTION
CABLES. Use of other cables may result in damage to this
jump starter, fire, personal injury and damage to vehicle or
property.
For Jump Starting 12V Vehicle
1. Before attempting to start a 12V vehicle, please make
sure at least 3 LED lights are illuminated on this jump
starter when pressing the power button.
Connect the Red clamp to the battery Positive (+)
2.
and Black clamp to the battery Negative (-) terminals,
making sure they have a good connection.
WARNING: REVERSING THE CONNECTIONS MAY
RESULT IN DAMAGE TO THE JUMP STARTER, FIRE OR
PERSONAL INJURY.

JUMP STARTING

13