Replacing The Batteries - Bunker Hill Security 61565 Owner's Manual & Safety Instructions

Replacing the Batteries

1. If the Red Light illuminates the
Batteries need to be changed.
2. Follow the instructions for opening the Safe.
3. The Battery Compartment is located on the
inside of the Door. Gently slide the Battery
Cover off the Battery Compartment.
4. Remove used batteries.
Dispose of them properly or recycle them.
5. Insert four new "AA" Batteries. Position batteries
in proper polarity and do not install batteries of
different types, charge levels, or capacities together.
6. Reinstall battery cover by placing it low against the
Battery Compartment and sliding it into place.
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Item 61565 For technical questions, please call 1-888-866-5797.
7. After changing the batteries, test the Code and
change it as needed before closing the Door.
Figure F: Battery Compartment
Note: Replacement parts are not available for this item.
Battery
Cover
Page 7