RocketFish RF-BTSS01 Quick Setup Manual

RF-BTSS01_12-0875_QSG_V2_EN.ai RF-BTSS01_12-0875_QSG_V2_EN.ai
Bluetooth Speaker
Stand
RF-BTSS01
QUICK SETUP GUIDE
1 1 8/20/2012 8/20/2012 9:48:08 AM 9:48:08 AM
This speaker stand is a Bluetooth stereo
speaker system with an AUX in feature. It
can be operated with the rechargeable
battery, or with the included AC power
adapter.
AUX input is prioritized whenever a 3.5 mm
cable is plugged in.
Package contents
• Speaker stand
• Stereo audio cable
• Removeable tablet support
• AC power adapter
• Quick Setup Guide
Features
Top
Volume down Volume up
ON/OFF/PAIRING LED indicator
Button
Rear
Removeable
tablet support
Aux input jack DC power jack
V2
FINAL
FOR PRINT
Using your Bluetooth stereo
speaker stand
First time pairing (with a new device)
1 Make sure that the speaker stand is fully
charged or power adapter is plugged in.
2 Press and hold the ON/OFF/Pairing
button for approximately eight seconds
until the LED flashes blue and red
alternately (in pairing mode).
3 Turn on the Bluetooth on your other
Bluetooth device (e.g., tablet, mobile
phone or MP3 player), then search for
device name "RF-BTSS01" and choose to
connect.
The LED indicator will turn blue after
successfully connecting. The speaker is
ready to play audio from the connected
device.
Auto playback (auto pairing with the
same device)
1 Make sure that the speaker stand is fully
charged or power adapter is plugged in.
2 Make sure that the same Bluetooth
device is switched on.
3 Turn on the speaker by pressing the
on/off/pairing button (make sure that
any cables connected to the AUX in jack
are unplugged).
4 The speaker stand automatically
searches for the devices that paired
with it last time.
When the same device is found, it will
automatically pair again and be ready
to play audio from the connected
device.