Page 1
User ' s Manual Models CL-65, CL-30 Amplified DECT Cordless Telephone With Talking CID & Talking Keypad (CL-65 = 55 dB; CL-30 = 40 dB) Thank you for purchasing this product, please read before use (Keep this manual for future reference)
CONTENT Product Features Important safety instructions Package content Installation Detailed features and controls Answering a call Making a call Receiver volume control (Amplify) function Receiver tone control Automatic Function, Talking function & Language Switches Programming one-touch memories Dialing from a one-touch memory Change handset ringer tone and volume Register a new handset to base 9-10...
PRODUCT FEATURES Important Safety Instructions Instructions pertaining to a risk of fire, electric shock or injury to 1. DECT 6.0 Technology ensures crystal clear conversation persons. Privacy of communications may not be ensured when using a cordless phone. 2. Up to 55 dB Of amplification for CL-65 (40 dB for CL-30) 3.
12. To reduce the risk of electric shock, this appliance has a Disposal of Used Batteries and Safety Information polarized plug (one blade is wider than the other). This plug 1. Do not disp o se of the battery in a fire as it may explode. will fit in a polarized outlet only one way.
Detailed Features and Controls button: Press to end a call. 6. Auto-Amplifier Switch Enables automatic function. (6, 7 & 7B are located in battery compartment). 7. T alking CID/ Keypad Switch Enables Talking CID and Talk -Back feature Language Switch: Select either English or French voice output.
Answering a call Pressing repeatedly means changing from T1 toward T4. A long beep indicates the highest tone setting has 1. Press key when phone rings. reached (T4). You should stop pressing. (Press again to engage speakerphone if need). Pressing repeatedly means changing from T4 toward 2.
Dialing from a One-Touch Memory 2. While of f -line, press and hold the key on the side of the handset for about 5 seconds. It beep s once and starts 1. While off-line, press any one-touch memory key to hear searching for the base.
Out-Of-Range Warning Tone Intercom Between Handsets While talking, there will be a long beep sound if the handset is 1. This funct io n is available when two or more handsets are out-of-range from the base. Please walk back toward the base registered to the same base.
Specification Conference Call Amplified dB level (Amplify off): 0 to 18 dB in 5 steps This allows two handsets conferencing with the incoming caller. CL-65 Amplified dB level (Amplify on): 1. On Handset 1, press key to answer the incoming call. 37 to 55 dB (measured at 3 Khz with Tone=4) CL-30 Amplified dB level (Amplify on): p age key and then press "2 on...
(freight prepaid) with proof of powered off. (Press and hold the key for 5 seconds purchase (sales receipt or packing slip, no exceptions) to Serene to po wer up the handset). Innovations. Serene Innovations will either repair or replace the Handset flasher works but handset d o e s not ring.
Page 11
For repair or warranty information, provided to your telephone company. please contact Serene Innovations, Inc. at 562- 407 5400. This equipment uses the following Universal Service Order Codes ("USOC") jacks: RJ-11. Connection to the telephone...
Page 12
Part 15 of FCC Rules Information Modification: Any modification not expressly approved by the This device complies with Part 15 of the FCC rules.Operation manufacturer of this device could void the user's authority to is subject to the following two conditions: (1) This device may operate the device.
Page 13
inspections authority, or electrician, as appropriate. The REN for this amplified telephone as stated on the IC regulatory label located on the bottom of the product. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.