Sony KV-32FQ80K Operating Instructions Manual page 72

32FQ80 B5 Part 4.fm Page 14 Wednesday, May 29, 2002 9:57 AM
Using the 'Individual Setting' menu
You can set this menu so that only the programme types you wish to view are displayed in the
programme list column.
1.
2.
3.
4.
5.
Using the 'Long Info' menu
This feature allows you to set timers and record selected programmes.
1.
2.
3.
4.
The following table explains each option:
To set the
timer
To view the
timer table
To record a
programme
(only for
Smartlink
VCRs)
14 Basic Operation
Select the icon in the NexTView menu. Press the b button to display the 'Individual
Setting' menu.
Press the V or v buttons to select the programme type you require. Press the OK
button to confirm your choice.
Repeat Step 2 for all the programme types you wish to have in your list.
Press the b button to select the
to the previous menu.
Press the V or v buttons to select the
your 'Individual Setting' choices.
Press the V or v buttons to select a future programme from the programme list.
Press the OK button to display the 'Long Info' menu.
First nextTView/EPG-Providers in Europe
07 Tue
SWISS TXT TPS / RINGIER nexTView
12:38
Tue 07. 04 .98
Address Mapping
The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.
If other values are set, the complete
combination will be scrolled.
Example:
if the DPWC is set to '63', the char-
This channel has been set for a timer
VPS/PDC On
Speed SP
Timer Prog VCR1
Press the V or v buttons to highlight the option you require.
Press the b button to select the
menu.
Option
Press the B or b button to highlight the
Once the timer is set a clock symbol appears by the programme in the NexTView menu.
Shortly before the programme starts, a message appears asking whether you still wish to
view the programme.
Press the B or b button to highlight the
timer table On or Off. This table can display up to 5 timed programmes you have set.
Press the B or b button to highlight the
programme information to the VCR. You can then set up the following options:
VPS/PDC Press the B button to select VPS/PDC. Press the OK button to select On
or Off. When set to On you will not miss any of the recording should there
be a change in the TV programme schedule. This only works if the selected
channel broadcasts a VPS/PDC signal.
Speed Press the v button to select Speed. Press the OK button to select SP for
standard play or LP for long play. With long play you can record twice as
much on a videotape. The picture quality however may suffer.
VCR Setup Press the v button to select VCR Setup. Press the OK button to select
which VCR you wish to programme. Choose between VCR1 and VCR2.
icon on the menu. Press the OK button to return
icon again. Press the OK button to activate
First nextTView/EPG-Providers in Europe
07 Tue
SWISS TXT TPS / RINGIER
12:38
Tue 07. 04 .98
Address Mapping
The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.
If other values are set, the complete
combination will be scrolled.
Example:
if the DPWC is set to '63', the char-
This channel has been set for a timer
VPS/PDC On
Speed SP
Timer Prog VCR1
icon. Press the OK button to return to the previous
How to use
symbol. Press the OK button to set the timer.
symbol. Press the OK button to switch the
symbol. Press the OK button to download the
nexTView