First Time Operation; Switching On The Tv And Automatically Tuning - Sony KV-14LT1U Instruction Manual

Fd trinitron colour television

Hide thumbs Also See for KV-14LT1U:

Quick start manual (2 pages)

Service manual (42 pages)

Service manual (47 pages)

Table Of Contents

Table of Contents

Switching On the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screen appear on the TV enabling

you to: 1) choose the language of the menu screen, 2) search and store all available channels

(TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the

screen.

However, if you need to change the language menu, change or repeat the tuning (e.g. when

you move house) or rearrange again the order of the channels afterwards, you can do that

by selecting the appropriate menu in the

"Menu Guide" section of this instruction manual. You can also do that by pressing the

Auto Start Up Button

Connect the TV plug to the mains socket (220-240V AC,

50Hz)

The first time the TV set is connected, it is usually turned

on. If the TV is off, press the

set to turn on the TV.

The first time you press this button, a Language menu

displays automatically on the TV screen.

Press the

the language, then press the OK button to confirm your

selection. From now on all the menus will appear in the

selected language.

The Auto Tuning menu appears on the screen. Press the

OK button to select Yes.

A new menu appears on the screen asking you to check

that the aerial is connected. Ensure the aerial is connected

and then press the OK button to start the automatic

tuning.

The TV starts to automatically search and store all

available channels (TV Broadcast) for you.

This procedure could take some minutes. Please be

patient and do not press any buttons, otherwise the

automatic tuning will not be completed.