Table of Contents
Advertisement
Enter the phone number on the key pad.
5.
To store the phone number, press OK. The number you entered displays, along with the
6.
notification
"RECORDED"
Internal Phone Book, then the name also displays.
The screen then returns to the
7.
For voice-activated dialing in hands-free mode, refer to the optional HFC600 hands-free car kit
manual.
Setting up Voice activated dialing
Voice activated dialing is always on once you have programmed the phone to accept voice dialing
entries. To place voice-activated dialing calls, press and hold TALK.
Then say the name into the phone after you hear the voice prompt and the beep.
You can also initiate a voice dialing call by simply opening the flip, when the voice dial option is
activated.
To change voice dialing setup options:
From the Main Menu press
1.
4
Press
for
Training (Set Active)
GHI
2.
Press the scroll keys to toggle between options:
3.
: Enables voice dialing by pressing and holding TALK.
Talk Only
_
: Enables voice dialing by pressing and holding
Talk /Flip
_
simply opening the flip.
When the desired option displays, press
4.
Placing a call using voice dialing
To place a call using voice dialing:
Open the phone and set to the Main Menu.
1.
Press and hold down the
2.
At the voice prompt, say the name into the phone.
3.
The phone places the call if it recognizes the name.
_
If the phone does not recognize the name, it prompts for the name again.
_
If the phone is unable to recognize the name after two attempts, it says
_
" and the following message displays:
recognized.
phone returns to standby mode automatically, and you can try the call again later.
Reviewing voice dialing entries
To review voice dialing entries:
. If the number you entered matches a name/number already stored in your
menu.
Voice Dial
7
for
.
PRS
Voice Dial
.
OK
to
TALK
key.
TALK
(when the phone is open), or by
the setting.
Save
"Cannot recognize name. please check name.
66
" The name cannot be
" The
Advertisement
Table of Contents
