Out Of Range Alert; Menu Options; Menu Operation - General Explanation - Philips AVENT SCD535 Manual

2 To select another lullaby, press the lullaby button K on the baby unit within 2 seconds to
toggle through the list of lullabies. (Fig. 31)
Note: If you do not press the lullaby button K for more than 2 seconds, the lullaby shown on the display
starts to play.
The number of the lullaby appears on the display together with the lullaby symbol K.
,
The selected lullaby is repeated 5 times in a row.
,
When you select 'play all', all 5 lullabies are played once.
,
3 To stop the lullaby, press the play/stop button E on the baby unit again. (Fig. 30)
4 To select another lullaby when a lullaby is playing:
- Press the lullaby button K on the baby unit within 2 seconds to toggle through the list of
lullabies.
Note: If you do not press the lullaby button K for more than 2 seconds, the lullaby shown on the display
starts to play.
humidity
When there is a connection between the baby unit and the parent unit, the humidity level is shown
on the display of both units.
The optimal humidity level is between 40% and 60%. It is very important to maintain the correct
humidity level as it helps to protect your baby from irritation of the mucous membranes, dry and
itchy skin, chapped lips and a dry, sore throat. When the mucous membranes do not function
optimally, they cannot give your baby full protection from all kinds of germs. This increases the
chance of your baby catching a cold or the flu, and reduces its resistance to infections from mold
and bacteria.
Note: The baby monitor only measures the humidity level. You cannot adjust the humidity level with the
baby monitor.

out of range alert

When the parent unit is out of range of the baby unit, the parent unit beeps from time to time and
the messages 'Searching' and 'Not linked' appear on the display. The LINK light on the parent
unit flashes red.
Note: The message 'Not Linked' also appears on the display of the parent unit when the baby unit is
switched off.

Menu options

All functions can be operated on the parent unit, but some functions can also be operated on
the baby unit.

Menu operation - general explanation

Note: Menu functions can only be operated when a connection has been established between the baby
unit and the parent unit.
1 Press the MENU button to open the menu (Fig. 32).
The first menu option appears on the display.
,
2 Use the – and + buttons to select the desired menu option (Fig. 33).
Note: The arrow indicates in which direction you can navigate.
3 Press the OK button to confirm (Fig. 34).
4 Use the + and - buttons to select the desired setting.
4222.005.0003.1.indd 15
EngliSh
15
25-03-10 15:03