Radio Operation; Cassette Operation - Crosley CT100B Instruction Manual

Hide thumbs Also See for CT100B:

Table of Contents

English

Radio Operation

1. Set the Function Switch to RADIO position

2. Set the Band Switch to FM, AM, SW1, or SW2 position.

3. Rotate the Tuning Knob for desired radio station.

4. To turn off the unit, set the Function Switch to the OFF/TAPE position and

make sure none of the cassette button are pressed in.

Note:

 When operating FM and SW band radio, pull up the TELESCOPIC ANTENNA, and

adjust position to get better reception.

 SW1 and SW2 are shortwave radio bands.

1. Set the Function Switch to TAPE position.

2. Insert the prerecorded cassette into the cassette tray, and press the Play

button.

3. To fast forward, press the Fast Forward button in. To stop fast forwarding and

return to the playback mode, press the Play button.

4. To rewind, press the Rewind button in. To stop rewinding and return to the

playback mode, press the Play button.

5. To stop the playback, press the Stop/Eject button once. To eject the cassette,

press the Stop/Eject button again.

6. To turn off the unit, set the Function Switch to the OFF/TAPE position and

make sure none of the cassette button are pressed in.

Note: Remove the cassette from the cassette holder when it is not in use.

Cassette Recording

MICROPHONE to TAPE

1. Set the Function Switch to TAPE position

2. Insert a cassette tape, and press the RECORD button to record the sounds

through the microphone.

Note: To prevent accidental recording, break off the cassette tab from side A or B.

Table of Contents