Installation - D-Link DWL-6610APE Quick Installation Manual

Unified ac concurrent dual-band poe access point
Table of Contents

Advertisement

Power button
(for power adapter)

Installation

Power on the Access Point
To power on the DWL-6610APE, you can use
ONE of the following methods:
1. Connect the supplied power adapter
OR
2. Plug one end of an Ethernet cable into the LAN
port of the DWL-6610APE and the other end into
a port on a PoE switch.
Configure the Access Point
To set up and manage the DWL-6610APE, use
one of the following methods:
Manage the access point from the computer:
connect the access point and your computer
directly via a straight-through Ethernet cable.
DWL-6610APE
Manage the access point from the computer
via the switch or router: connect the access
point and your computer to the same switch
or router.
Switch or Router
DWL-6610APE
Reset button
Mounting Options
You can mount a DWL-6610APE access point on
any of the following types of surfaces:
- Solid surface wall or ceiling
- Tabletop
Cable Requirement
Use a CAT 5 cable with an even sheath.
The Ethernet ports on the DWL-6610APE access
point cannot accept a CAT 5 cable that has an
uneven sheath; the RJ-45 connector on the cable
will not fit properly into the receptacle on the
access point.
Wall Installation Recommendations
If you plan to install the DWL-6610APE on a wall
or other vertical surfaces, orient the top of the
access point (the side with the LEDs) toward
the intended coverage area. The radio antennas
transmit through the top of the access point but
not through the bottom (where the bracket is).
Warning: The DWL-6610APE is designed
Computer
to receive PoE power only from an
802.3af-compliant source, or from a D-Link-
approved power injector. Connecting an access
point to a Power over Ethernet (PoE) device
that is not approved by D-Link can damage the
equipment.
Computer
Manage the access point from the computer
via the Unified Wireless Switch or Wireless
Controller: connect the access point to
a Unified Wireless Switch or Wireless
Controller. Connect your computer to the
same network as that of the Unified Wireless
Switch or Wireless Controller.
Unified Wireless Switch
DWL-6610APE
Wireless Controller
D-Link DWL-6610APE Quick Install Guide  3
or
Computer

Advertisement

Table of Contents
loading

Table of Contents