Quick Setup/ Connection Diagram - ION IPA18D Quick Start Manual

Quickstart Guide (English)
Support
For product registration, visit the ION website: ionaudio.com
For the latest information about this product, visit
ionaudio.com/houseparty
For additional product support, visit ionaudio.com/support
For safety/warranty information, visit ionaudio.com/warranty
WARNING: DO NOT splash or immerse in water or other liquids.
Not for use in rain. Use only in dry locations.
WARNING: DO NOT look directly into the dome light. Do not sit, stand, or apply pressure on the dome light.

Quick Setup/ Connection Diagram

1. Make sure all items listed in Box Contents at the beginning of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. Move Light Mode switch to OFF.
4. Turn down the Master Volume on the House Party.
5. Turn on House Party.
6. Connect your music player with an audio cable or Bluetooth (see Connecting with a Bluetooth Device
for more details on this).
7. Adjust the volume on your music player and on House Party as needed.
8. Adjust the Light Mode switch on House Party as needed.
9. Turn off House Party when not in use.
MP3 PLAYER
(not included)
Included Audio Cable
with 1/8" (3.5mm)
connectors
MICROPHONE (not included)
Diagram and Parts Description
1. Microphone Input with Volume Control (1/4"): This
mono input accepts a 1/4" input such as a
microphone, guitar, or other musical instrument.
2. Auxiliary Input: This stereo 1/8" input can be used to
connect a smartphone, MP3 player, or other audio
sources.
3. Bluetooth®: The Paired LED will be lit when a device is
paired to HOUSE PARTY. This LED will not be lit when
HOUSE PARTY is first powered on (unless it was
previously paired with a device). Press the Disconnect
button to disconnect a paired Bluetooth device.
4. Master Volume Control: This adjusts the speaker's main
mix volume, which includes Microphone Input, Auxiliary
Input, and the audio of a paired Bluetooth device.
TOP PANEL
3
BOX CONTENTS
HOUSE PARTY
Audio Cable with 1/8" (3.5mm)
connectors
Power Adapter
Quickstart Guide
Safety Instructions & Warranty
Information Booklet
REAR PANEL
Please use the included
power supply or equivalent
only.
*WARNING: Do not look directly into the
dome light. Do not sit, stand, or apply
pressure on the dome light.
1
POWER
Power Adapter: 12V DC,
3A, Center pin-positive, tip
negative (included)
7
2
6
3
5
4