Deactivating The Tank Indicator; Care And Cleaning; Cleaning The Filter - AEG T9DEC866R User Manual

CARE AND CLEANING

9.3 Deactivating the tank indicator

The water container indicator is activated by default. It illuminates at the end of the drying cycle
or during the cycle if the water reservoir is full. If the draining kit is installed the water container
is drained automatically and the indicator can be deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available programmes.
4. Touch and hold down Refresh and Time Drying buttons at the same time.
One of 2 configurations is possible:
• the Tank indicator:
indicator is permanently activated
• the Tank indicator:
indicator is permanently deactivated
10. CARE AND CLEANING

10.1 Cleaning the filter

At the end of each cycle the
filter.
The filter collects the lint during the drying cycle.
To achieve the best drying performances clean the filter regularly , clogged filter
lead to longer cycles and energy consumption increase.
Use your hand to clean the filter , and if necessary , a vacuum cleaner .
CAUTION!
Avoid the use of water to clean the filter. Instead throw away lint in the dustbin
( avoid dispersion of plastic fiber in water ambient).
1. Open the door. Pull the filter up.
2. Push the hook to open the filter.
22/36
is on if the symbol
is off if the symbol
Filter symbol comes on the display and you must clean the
appears - the water container
appears - the water container