Using the ND Filter
The ND filter reduces light intensity to 1/8 (3 stops) of the actual level,
allowing for slower shutter speeds and smaller aperture values.
Attach the camera to a tripod to prevent camera shake.
Shooting with Slow Synchro
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Attach the camera to a tripod to prevent the camera from moving and
blurring the image. It is recommended to set the [IS Mode] to [Off] when
shooting with a tripod (p. 155).
Choose
.
After pressing the m button, press the
●
op buttons to choose
Set [ND Filter] to [On].
Press the qr buttons or turn the  dial
●
, then press the m button.
to choose
Choose ....
After pressing the r button, press the qr
●
buttons or turn the  dial to choose ...,
then press the m button.
Once set, ... will appear on the screen.
Shoot.
●
Even if the flash fires, ensure that the
subject does not move until the shutter
sound ends.
.
99