Table of Contents
Advertisement
screen), or Spot (takes an exposure measurement only in a small
area at the center of the screen).
• Single Shot Mode: Take and Save (displays each picture on the
screen after it is taken) or Automatic Save (pictures are automatically
saved and the camera returns immediately to Capture mode).
• Shutter Sound: Selects sound for the camera shutter (Shutter1,
Shutter2 or Shutter3).
• Zoom Sound: Turns the zoom sound on and off.
• Brightness Sound: Turns the brightness sound on and off.
• Default Name: Lets you change the default file name.
Camera Options After Taking a Photo
When Single Shot mode is set to Take And Save, while an image you have
just taken is displayed you can press
♦
Send: Allows you to send the picture in a picture message or to an
online album.
♦
Viewfinder: Returns to the active camera screen so you can take
another picture.
♦
Set as:
• Wallpaper: Sets the picture as your wallpaper for the idle screen.
• Caller ID: Sets the picture as caller ID image for a Contact List entry.
♦
Edit: Opens the Image Editor. Press <Options> to access the following
editing and sharing tools:
•New Image: Lets you open a different file or take a new photo.
•Save as: Lets you specify a unique name for the picture file.
Otherwise, pictures are named using the default naming convention
(to change the default format see Default Name in the previous section).
•Effects: Allows you to allows you to apply a Black and White, Negative,
Sepia, Blur, Sharpen, Sketch, Posterize or Solarize effect to the picture.
•Adjust: Lets you adjust Brightness, Contrast and Color settings. Use
the left and right navigation keys to move the adjustment slider.
Tools
88
to access the following options:
Advertisement
Table of Contents
