List Of Messages - Canon PowerShot A100 User Manual

G List of Menu Options and Messages G

List of Messages

The following table explains each of the messages that may appear on the LCD monitor.
Busy... : The camera is recording image data to the CF card. The Replay mode is running.
No CF card : You attempted to shoot or replay with no CF card installed.
Cannot record! : You attempted to shoot with no CF card installed.
CF card error! : There is something wrong with the CF card.
CF card full : The CF card is too full to store images or accept new print settings.
Naming error! : The camera cannot generate a file name for the image you have shot because the card
already contains a folder having the same name as the file to be created, or the file
number has already reached the maximum possible value. Display the Rec. menu and
set [File Number Reset] to [On]. Save all images you wish to keep into your computer,
and reformat the CF card. Please note that formatting will erase all data in the card.
Change the batteries : The batteries are dead, and the camera can no longer function. Replace both batteries
at the same time with new AA-size alkaline batteries (p. 19) or fully recharged batteries.
No image : No images recorded on CF card.
92
Image too large : You attempted to replay an image whose resolution exceeded 3200 x 2400 pixels or
whose file size was too large.
: You attempted to replay an incompatible JPEG file.
Incompatible JPEG format
: You attempted to replay an image with corrupted data.
Corrupted data
RAW : You attempted to replay an image recorded in the RAW format.
: You attempted to replay an image file recorded in a unrecognized format (file recorded
Unidentified image
by a different camera in a proprietary format, etc.).
: The image you attempted to magnify was recorded by another camera, or recorded in a
Cannot magnify!
format that cannot be magnified, or edited on a computer.
: The image you attempted to rotate was recorded by another camera, or recorded in a
Cannot rotate!
format that cannot be rotated, or edited on a computer.
Protected! : You attempted to erase a protected image.
: Too many images have been marked for printing. No more images can be marked.
Too many marks!
: You attempted to set the print settings for a non-JPEG file.
Unselectable image
: Camera malfunctioned. Turn off the power and turn on again, then re-shoot or replay. If
Exx
the same message recurs frequently, the camera may be damaged. Note down the error
number [xx] and take the camera to a Customer Support Help Desk. If this message
appears immediately after you have taken a shot, the camera may not have shot the
image. Switch to the Replay mode and check whether the image was actually recorded.
G List of Menu Options and Messages G
93