Table of Contents
Advertisement
• Data bearer - set a data transmission
type
• Access point name - set the web
address for the access point
• User name - set a user name
• Prompt password - set to ask for a
password when you connect to the
access point
• Password - set a password for the
access point
• Authentication - set an
authentication mode
• Homepage - set a homepage for
access points that connect to web
services
You can also define advanced settings for
Access points: press <Options> →
Advanced settings.
• Network type - set a network type
(IPv6 or IPv4)
• Phone IP address (IPv4 only) - set
the IP address of your device
• DNS address (IPv4) - set primary and
secondary domain name server (DNS)
addresses or set to 0.0.0.0 for
automatic detection
• DNS address (IPv6) - set primary and
secondary domain name server (DNS)
addresses or set to Automatic (use
automatic detection) or Well-known
(use well-known IPv6 addresses)
• Proxy server address - set the IP
address of the proxy server
• Proxy port number - set the port
number of the proxy server
Settings
91
Advertisement
Table of Contents
