Table of Contents
Advertisement
To reset the packet data counters,
1. In Standby mode, press [MENU]
Packet data.
→
2. Press <Options>
3. Enter the lock code (the default lock code is
00000000), and then press <OK>.
Communication log
You can view communication details and filter
logs with the communication log.
View the communication log
1. In Standby mode, press [MENU]
2. Scroll right to switch to the communication
log.
Some events, such as a text message split
into multiple parts, will appear as one
communication event.
Filter log events
1. In Standby mode, press [MENU]
2. Scroll right to switch to the communication
log.
→
3. Press <Options>
→
→
Log
Clear counters.
→
Log.
→
Log.
Filter.
4. Scroll to a filter type and press [OK].
Erase the communication log
To permanently erase all of the log contents,
1. In Standby mode, press [MENU]
2. Scroll right to switch to the communication
log.
→
3. Press <Options>
4. Press <Yes> to confirm.
Log duration
You can change the length of time that
communication events are stored in the logs.
After that time, events are automatically erased to
free up memory.
To set a log duration,
1. In Standby mode, press [MENU]
→
2. Press <Options>
→
3. Press <Options>
4. Scroll to a duration and press [OK].
If you select No log, no communication
events will be stored in the log.
→
Log.
Clear log.
→
Log.
Settings.
Change.
25
Advertisement
Table of Contents
